Pulse Reverse Blow type Dust Collector

1.pulse reverse blow type, 2.cover an area is small, 3.installed power is low, 4.higher dust removal efficiency,

Company advantage

1. Listed company

2. State owned holding company.

3. More than 1,000 employees, 398 technical personnel.

4. Annual production capacity can reach USD100 million.

Work principle

     Dust collector is mainly composed of housing, the housing, hopper, into the wind all flow tube, support filter bag and injection device, discharging device composition. Dust gas from the dust in the wind all flow tube into the chamber body ash bucket, using the ash bucket flow guide device, large particles of dust was separated, direct fall into ash bucket, and a fine dust evenly into the middle box and adsorption in the filter bag appearance face, clean gas through filter bag into the box, the offline valve and exhaust duct into the atmosphere.

    Along with filtration condition, the filter bag dust is more and more, when the equipment resistance to a limited amount of resistance value (general set for 1500 pa), soot cleaning control device according to differential pressure setting value or soot cleaning time setting value automatically shut off one room offline valve, set according to program open electronic pulse valve, stop the wind blowing, the use of compressed air instant injection make filter bag pressure increase together, will be on the filter bag dust to shake off (even if viscosity fine dust also can be thoroughly clear grey) to ash bucket, the ash discharge mechanism discharge.

Advantage

1. The bag filter can remove more than 0.1 micron particle size of dust particle, the dust removal efficiency 99%.2. The bag material available natural fiber or synthetic fiber textile or felt.3. Purification high temperature gas, can use glass fibre filter materials.4. The machine easy dismantling, cleaning, suitable for refueling operation.5. Design and production in accordance with GMP, C - GMP and FDA standard

Pulse Reverse Blow type Dust Collector

Size of dust-collector	Number of filtering bag	Filtering area	Filtering width
FD601	72	108	1150
FD610	108	162	1630
FD602	144	216	2198
FD611	180	270	2678
FD620	216	324	3158
FD612	252	378	3726
FD621	288	432	4206
FD630	324	486	4686
FD622	360	540	5254
FD631	396	594	5734
FD640	432	648	6214
FD632	468	702	6782
FD641	504	756	7262
FD650	540	810	7742

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pulse Reverse Blow type Dust Collector